Get the maximum performance of your Norelco and Oneblade product with replacement heads!

Search your Norelco or Oneblade product to find the compatible replacement parts.

With the right care and cleaning, our shaving & grooming devices will continue to perform day after day.

Search by product number.

Sorry, we did not find any parts or accessories for this product.

Please check if you filled in the correct model number. The model number consists out of letters followed by numbers (e.g. Shaver 9300, S9311/84).

In case the model number does not offer any results, we would like to advise you to reach out to our contact center.

We found {number} products that are available outside your country, so local promotions may not apply.

Show products Hide products

Found {number} products

Found your model, but...

This product is not available in your country, but we found one in another country

Please select your model based on the last 2 digits of your product number shown in blue.

Found your model!

foundation-catalog.se01c-prx-search.search-sub-heading7

foundation-catalog.se01c-prx-search.search-sub-heading8

If this is the correct one, please select it below. Otherwise, search again.

Product image

Product description

Model number

Back to all products

How can you find your Norelco model number?

Shaving

Replacement heads
Replacement heads
How to replace your shaver heads

With regular use, your shaver heads will cut nearly 5 million hairs per year! To maintain top performance, we recommend you replace the shaver heads every year. Here’s how.

Series 9000

1. Open and/or detach the head unit.
2. Twist to unlock retaining rings and remove old shaving heads.
3. Insert Philips replacement shaver heads.

4. Lock retaining rings.
5. Close and/or attach the head unit.

Series 7000

1. Open and/or detach the head unit.
2. Twist to unlock retaining rings and remove old shaving heads.
3. Insert Philips replacement shaver heads.

4. Lock retaining rings.
5. Close and/or attach the head unit.

Series 5000

1. Open and/or detach the head unit.
2. Twist to unlock retaining rings and remove old shaving heads.
3. Insert Philips replacement shaver heads.

4. Lock retaining rings.
5. Close and/or attach the head unit.

For Series 9000:

Shave series 9000 and SP9000

Replacement shaving heads

SH91/52

SkinProtect Blades

Fits S9000 (S9xxx)

Fits S9000 Prestige (SP98xx)

View product

For Series 7000:

Shaver series 7000, 5000

Replacement shaving heads

SH71/52

SkinProtect Blades

Fits all S7000

Fits angular-shaped S5000

Not for rounded-shaped S5000

Fits S6600

4.5 (38 reviews)

Overall rating 4.5 / 5

View product

For Series 6000:

Sh50/52 Blade Refill

Replacement shaving heads

SH50/52

Compatible with Norelco Shaver Series 5000 Rounded Heads and 6000 (except S6600 & S6800 whose refill is SH71)

Fits AquaTouch (AT8xx, AT7xx, S5xxx)

Fits PowerTouch (PT8xx, PT7xx)

Fits PowerTouch (PT8xx, PT7xx)

3.3 (115 reviews)

Overall rating 3.3 / 5

$34.99*

View product

Series 6000

Shaving heads

SH60/72

SkinProtect Blades

Designed to fit S6000 (S6xxx), except for S6600

4.1 (23 reviews)

Overall rating 4.1 / 5

$44.95*

View product

For Series 5000 & below:

Sh50/52 Blade Refill

Replacement shaving heads

SH50/52

Compatible with Norelco Shaver Series 5000 Rounded Heads and 6000 (except S6600 & S6800 whose refill is SH71)

Fits AquaTouch (AT8xx, AT7xx, S5xxx)

Fits PowerTouch (PT8xx, PT7xx)

Fits PowerTouch (PT8xx, PT7xx)

3.3 (115 reviews)

Overall rating 3.3 / 5

$34.99*

View product

Don't own a Series 9000, 7000 or 5000?

View all shaver heads
Cleaning your shaver
Cleaning your shaver
How to clean your shaver

Philips offers different cleaning methods to keep your shaver in top condition at all times.

For shavers with SmartClean

SmartClean cartridges should be replaced every 3 months.

1. Press the top cap to open the SmartClean
System.
2. Shake off any excess water from shaver
before placing in the SmartClean System.
3. Hold the shaver head side down above the
shaver holder.
4. Place the shaver into the holder, push
shaver back and press down the top
cap to connect the shaver (click).
5. Press the ON/OFF button on the
SmartClean System to start the cleaning
cycle.

For shavers with JetClean

We recommend cleaning regularly with our JetClean solution.

1. Rinse the shaver briefly under the hot tap.
2. Place the shaver (without the protection cap) in the holder.
3. Press the on/off button on the Jet Clean System to start the cleaning program.

For other shavers

We recommend using our shaving head cleaning spray.

1. Turn the shaver on.

2. Rinse the shaving unit under a hot tap.

3. Turn the shaver off.

4. Open the shaving unit.

5. Rinse the inside of the shaving unit and hair chamber under a hot tap for 30 seconds.

6. Reassemble the shaving unit and carefully shake off excess water. Let the shaving unit dry completely.

Cleaning products

Cleaning cartridge

JC302/52

2-pack

Cleans

Lubricates

Refreshes

4 (8 reviews)

Overall rating 4 / 5

$11.99*

View product

Jet clean solution

HQ200/52

With Cool Breeze scent

4.1 (22 reviews)

Overall rating 4.1 / 5

$4.95*

View product

FAQs

How do I know if my Philips shaver is waterproof?

This will be indicated on the back of your Philips shaver, depending on your specific model.

If a tap symbol is printed on the back of the shaver:

Your shaver is washable. This means that you can rinse your shaver under the tap according to the instructions in the user manual. You cannot use the shaver in the bath or shower, however.

If a bath symbol is printed on the back of the shaver:

Your shaver can be safely used in the bath or shower.

If there is no symbol at all on the back of your shaver OR if a crossed-out tap symbol is printed on the back of your shaver:

The appliance cannot be used in the bath or shower and cannot be rinsed under the tap. You must keep the shaver away from water.

How do I clean my shaver?

Cleaning station:

1. Press the top cap to open the SmartClean System.
2. Shake off any excess water from shaver before placing in the SmartClean System.
3. Hold the shaver head side down above the shaver holder.
4. Place the shaver into the holder, push shaver back and press down the top cap to connect the shaver (click).
5. Press the ON/OFF button on the SmartClean System to start the cleaning cycle.

Cleaning spray:

Turn the shaver on.

Rinse the shaving unit under a hot tap.

Turn the shaver off.

Open the shaving unit.

Rinse the inside of the shaving unit and hair chamber under a hot tap for 30 seconds.

Reassemble the shaving unit and carefully shake off excess water. Let the shaving unit dry completely.

How often should I use the cleaning station?

We advise you to use the SmartClean system at least once a week.

When do I need to replace the SmartClean cartridge?

Replace the cleaning cartridge when the replacement symbol flashes orange or when you are no longer satisfied with the result. We also recommend to replace the cartridge at least every three months for hygiene reasons.

OneBlade

Find OneBlade parts ›

OneBlade products

OneBlade

Replacement blade

QP420/80

Trim, edge and shave

2 x 360 Blade

Fits on all OneBlade handles**

Blade lasts up to 4 months*
4.4 (988 reviews)

Overall rating 4.4 / 5
View product
OneBlade

Replacement blade

QP225/80

Tough on hair, gentle on skin

2 x Anti-friction blade

Fits on all OneBlade handles

Blade lasts up to 4 months*
4.2 (158 reviews)

Overall rating 4.2 / 5
View product
OneBlade

Replacement blade

QP620/80

Trim, edge and shave

2 x Original Body Blades & 1 Body Kit

Fits with all OneBlade handles

Stainless steel blade that lasts up to 4 months of use* to keep that fresh feel
4.1 (41 reviews)

Overall rating 4.1 / 5

$29.95*
View product
OneBlade

Replacement blade

QP610/80

Trim, edge and shave

1 x Original Body Blade & 1 Body Kit

Fits with all OneBlade handles

Stainless steel blade that lasts up to 4 months of use* to keep that fresh feel
4.1 (41 reviews)

Overall rating 4.1 / 5

$19.95*
View product

Grooming

Body grooming
Body grooming
Keep in top shape

To keep your Philips Norelo Bodygroom at top performance, we recommend you replace the shaving foil every 12 months.

Bodygroomer products

Replacement shaving foil head

BG2000/40

3.2 (15 reviews)

Overall rating 3.2 / 5

$14.99*

View product

FAQs

When do I need to replace the foil?

Change foil every 12 months for best results.

How do I replace the foil?

Always switch the device OFF and remove the device from the charging stand before replacing the foil.

Remove the foil head by pulling it off the groomer.

Place the new foil head on the Groomer by snapping it into place. You will hear a "click".

After replacing the shaving foil head, check that the shaving head is firmly attached before using the Groomer.

When do I need to clean my groomer?

The groomer should be cleaned after each use.

How do I clean my groomer?

Always switch Groomer OFF, remove the power cord from outlet and charging stand before cleaning.

Remove the foil by pulling it off the appliance.

Rinse the foil under warm running tap water to rinse away debris.

Clean the hair chamber with the cleaning brush. You may also rinse the hair chamber under warm running tap water to remove any residual debris.

Do not use a towel or cloth to dry shaving foil or cutters as this may cause damage; allow to air dry thoroughly.

Reattach the shaving head by snapping it back onto the Groomer. You will hear a "click".

Rinse the Groomer body under running warm tap water. Wipe dry with a soft clean towel or cloth.

Can my groomer be rinsed under the tap?

Yes, you can rinse your Philips groomer under the tap.

When do I need to replace the shaving heads?

The latest Philips shavers have an built-in replacement reminder in the form of a shaving unit symbol. This symbol will light up and indicate you when to replace shaving heads.

If you own a shaver which doesn't come with the built-in replacement reminder we recommend you to replace your Philips shaving heads every year for optimal shaving results.

How do I replace the shaving heads?

Open and/or detach the head unit.

Twist to unlock retaining rings and remove old shaving heads.

Insert Philips replacement shaver heads.

Lock retaining rings.

Close and/or attach the head unit.

How do I reset the shaving heads replacement reminder?

After replacing shaving heads, you can reset the replacement reminder by pressing the on/off button for more than 7 seconds. Otherwise, replacement trigger will turn off automatically after 9 successive shaves.

How long do Philips OneBlade heads last?

Philips OneBlade heads typically last for about 4 months, but actual lifespan may vary based on usage.

How do I know if my Philips OneBlade is worn out?

Equipped with a blade-wear indicator, our OneBlade features a pattern that gradually transforms into an arrow symbol, signaling the need for a blade replacement. In the case of older models, the device will alternatively display a green bar instead of the arrow symbol as an indicator for blade change.

How do I change the head on my Philips OneBlade?

To change the head on your Philips OneBlade, simply press the release button on the back of the device, remove the old head, and snap on the new one until it clicks into place.

Get the maximum performance of your Norelco and Oneblade product with replacement heads!

Search your Norelco or Oneblade product to find the compatible replacement parts.

Search by product number.

Product image

Product description

Model number

How can you find your Norelco model number?

Shaving

How to replace your shaver heads

Series 9000

Series 7000

Series 5000

For Series 9000:

For Series 7000:

For Series 6000:

For Series 5000 & below:

Don't own a Series 9000, 7000 or 5000?

How to clean your shaver

For shavers with SmartClean

For shavers with JetClean

For other shavers

Cleaning products

FAQs

If a tap symbol is printed on the back of the shaver:

If a bath symbol is printed on the back of the shaver:

If there is no symbol at all on the back of your shaver OR if a crossed-out tap symbol is printed on the back of your shaver:

OneBlade

OneBlade products

Grooming

Keep in top shape

Bodygroomer products

FAQs

Philips OneBlade heads typically last for about 4 months, but actual lifespan may vary based on usage.

To change the head on your Philips OneBlade, simply press the release button on the back of the device, remove the old head, and snap on the new one until it clicks into place.

Subscribe to our newsletter

Payment

Quick links